Industrial

HYDRAULIC OILS

5

HYDRAULIC (AW 32, 46, 68 & 100)

• S 10522 – 1983 (Reaffirmed 1993) Ÿ
• ISO VG 32, 46, 68, 100
Superior quality anti-wear hydraulic oil. Benefits:
• Very good oxidation stability. Ÿ
• Very good anti-foam & anti-rust properties.
• High film strength which helps in minimizing friction and wear. Ÿ
• Excellent wear protection. Recommended for use in circulation systems and hydraulic circuits.
Available in pack sizes: 210L & 20L
Read More
6th-oil

OSO (SO VG 32, 46 & 68)

• DIN 51524 Teil 2 HLP Ÿ
• Denison HF 2 Ÿ
• AFNOR NF E 48603 HM
Trademark high quality oils for hydraulic
systems and equipments.
Benefits:
• Developed for all types of hydraulic systems and equipments.
• Formulated from selected paraffin base stocks treated with anti-rust, antioxidant and anti-wear additives. Ÿ
• Creates a strong lubricating film which can withstand high loads. Ÿ
• Recommended for use in hydraulic controls and hydraulic systems such as transport, construction and mining equipment as well as chemical and metallurgy machinery.
Available in pack sizes: 210L & 20*L *(Available in ISO VG 68 only)
Read More

arnica

ARNICA (SO VG 32, 46 & 68)

• DIN 51524 Teil 3 HVLP Ÿ
• ISO-L-HV Ÿ
• AFNOR NF E 48600 HV Ÿ
• DENISON HF-0 Ÿ
Premium quality hydraulic oils specially developed for use in high performance hydraulic systems.
Benefits:
• Excellent thermal, anti-oxidant and hydrolytic stability. Ÿ
• Extremely high viscosity index and very low pour point for correct operations.
• Recommended for hydraulic equipment subject to wide temperature variations i.e. construction & mining equipment and ceramic presses.
Available in pack sizes: 210L & 20*L *(Available in ISO VG 46 only)
Read More
4th-oil

OSO AS (ISO VG 32, 46 & 68)

• DIN 51524 Teil 2 HLP
• Denison HF 2 Ÿ
• AFNOR NF E 48603 HM Ÿ
OSO AS is a line of ash-less high quality hydraulic oils specially developed for use in all types of hydraulic systems and equipments.
Benefits:
• OSO AS oils have very good antiwear properties, as illustrated by typical test results:
* vane and ring wear in the Vickers test around 50 mg.
* the grade ISO VG 46 passes the 11th stage of the FZG test.
• The oils are designed for energy transmission in plants requiring the use of a hydraulic fluid. The oils also provide adequate lubrication by creating a strong lubricant film which withstands high loads between the sliding parts of high-pressure hydraulic systems.
• Recommended for not only for use as hydraulic fluids but also as heavy-duty lubricants for bearings, reduction units, etc., where operating conditions call for special anti-wear characteristics.
Available in pack sizes: 210L

Read More

 

SPINDLE OILS

car-3

ACER SO 10 EE

ACER SO 10 EE is a, special oil with very low viscosity, formulated from selected base stocks treated with antirust, antioxidant and some anti-wear additives. The AGIP ACER SO 10 EE is developed specifically as Energy Efficient lubricant for the ring frame.
Benefits:
• ACER SO 10 EE has extremely good oxidation resistance and stability to the ageing.
• Protection against wear. Ÿ
• Low spindle wear. Ÿ
• Longer component life.
ACER SO 10 EE is recommended for the lubrication of high speed spindles of machine tools. Can be used for lubrication of sleeve type spindle bearings and for applications where there is high speed and close clearances
Available in pack sizes: 210L
Read More

 

INDUSTRIAL GEAR OILS

indust-3

Blasia (ISO VG 68, 100, 150, 220, 320 & 460)

• DIN 51517 Teil 3 CLP
• ISO-L-CKD
• US STEEL 224
Meets the widest range of requirements of EP Lubrication.
Benefits:
• Excellent high speed and crash performances.
• Outstanding low speed and high load performance.
• Satisfy the widest range of operational requirements.
• Recommended for use in lubrication of all types of enclosed gears, especially where operating conditions involve heavy loads and high relative sliding velocities.
Available in pack sizes : 210L
Read More
truck-3

BLASIA XMP (ISO VG 220, 320 & 460)

• ISO-L-CKD Ÿ
• ISO 12925-1 – type CKD Ÿ
• ANSI/AGMA 9005-D94 (AGMA 4EP, 5EP, 6EP e 7EP) Ÿ
• DIN 51517 teil 3 – tipo CLP Ÿ
FLENDER BA 7300
The AGIP BLASIA XMP series are very high performance gear oils for lubricating in extreme pressure conditions (EP) the last generation industrial gear reducers, in particular, those extremely compact and of high specific power that could have problems of micro-pitting damages. Benefits: High thermal and oxidation stability, permitting continuous use at operating temperatures as high as 100°C. On-corrosiveness towards materials employed for the construction of machinery and especially those used for gaskets and seals, as well as metals such as steel, cast iron, copper and bronze AGIP BLASIA XMP oils have very good anti-wear and EP properties as demonstrated by the following tests:
• FZG (A 8,3/90), scuffing test: pass the 12th stage
• FZG (FVA 54) – micro pitting test, load stage > 10th.
• FAG FE 8 (DIN 51819-3), wear of rollers: 2mg.
• Timken OK load (ASTM D 2782), 70 lbs.
• 4 balls EP (ASTM D 2783), last non-seizure load: 110 kg; welding load: 280kg.
Recommended for splash or circulation lubrication of all types of enclosed gears, especially where operating conditions involve heavy loads, high speeds and high relative sliding velocities, at elevated ambient and operating temperatures in industrial and marine applications.
Read More

 

HEAT TRASFER FLUID

Alaria 3

Oils with excellent oxidation stability. Benefits:
• Withstand thermal decomposition.
• Withstand maximum boiler outlet temperature 3050 C.
• Withstand maximum boiler wall temperature 3200 C.

• Recommended for use in lubricating textile & glass-making machinery, for the preparation of silk screen printing, in the ceramic industry and as process oil in the production of chemicals and rubbers.
Available in pack sizes : 210L
Read More

 

QUENCHING OILS

Siblum

Quenching oil formulated from select paraffin base stocks. Benefits:
• Have a well balanced composition to ensure a high flash point.
• Excellent resistance to oxidation, carbonization and sludge formation.
• Recommended to be used for hardening alloy steel components when cracking and distortion must be avoided.
Available in pack sizes : 210L

 

SLIDEWAY LUBRICANTS

indust-5

EXDEIA EP (ISO VG 68, 220)

• ISO-L-G 220 Ÿ
• ISO-L-CKE 220 Ÿ
• STANIMUC G 32, 68 and 220 Ÿ
DIN 51502 CGLP AGIP EXIDIA EP oils are suitable for lubricating machine tool guides. The oils are paraffin-based with special greasing, anti- rust and anti-sticking additives (EP). Benefits:
• AGIP EXIDIA oils lubricate perfectly the guide-saddle connection of machine tools and prevent sticking and vibration, which influence the quality of finish of the machined item and the life of the tool.Ÿ
• The additives contained in the product modify the static and dynamic friction coefficient values in order to avoid “stick-slip” phenomena and thereby ensuring a regular action of the machines and compliance with the requested tolerances. Ÿ
• AGIP EXIDIA oils posses high load resistance characteristics. Ÿ
• Recommended for for the lubrication of guides, even with high loads, with circulation and total loss lubrication systems. AGIP EXIDIA 68 are also used as hydraulic fluids in those machines, especially grinding machines, in which a single oil is used for the lubrication of the guides and for the hydraulic drive. AGIP EXDIA 220 may also be used for the lubrication of gears in those cases in which an oil with “antistick-slip” characteristics is expressly required, such as, for example, in the case of worm screws.
Read More

 

METALWORKING FLUIDS

5

AQUAMET IFU

AQUAMET IFU is a EP type Emulsifiable biostatic oil suitable for metal-cutting operation. Manufactured from selected base stocks and additive pack containing a emulsifier which offers a very stable emulsion even in hard water. Offers effective metal protectionand system maintenance as it contains carefully selected biocides and rust inhibitors thereby providing long emulsion life.
Read More
6th-oil

AQUAMET IFU 85

AQUAMET IFU 85 is a high performance environmental friendly, long life semi-synthetic versatile metalworking oil. It is manufactured from specially selected base stocks and additive packs containing an emulsifier which offers a very stable emulsion even in hard water AQUAMET IFU 85 is a semi synthetic EP fluid for cutting and grinding operations. Read More

3

ASTER A

ASTER represent a new generation of chlorine-free complete line of metal-cutting oils available in many grades differing in viscosity and in type and quantity of additives ASTER A series oil are chlorine free cutting oils compounded with active sulphur, fat and additives to provide longer tool life and consistent surface finish. Read More
Ÿ
4th-oil

ASTER NS

ŸSeries are in-active sulphur base heavy duty neat cutting oils with good boundary lubricating additives to meet the desired machining requirements. They are used for machining of Ferrous and Ferrous alloys.

 

SYNTHETIC & INTERNATIONAL RANGE OF INDUSTRIAL OILS

5

ARNICA PSX 46

• Synthetic ŸHydraulic Oil Ÿ
• DIN 51524 HVLP D Ÿ
• ISO L-HV
Totally Synthetic (Synthetic Hydrocarbon) Hydraulic Oil.Benefits:Ÿ
• Synthetic base and special additives permits longer oil changes intervals.
• Possesses Excellent detergent/ dispersant, atioxidant, anti-rust and anti-rust and anti-wear properties.
• Extremely high VI and low pour point permits wide range of applications.
• Recommended for use in Ceramic presses. Suitable for use in the latest SACMI machines.
Available in pack sizes: 170 kg barrels.

Read More
6th-oil

BLASIA SX (ISO VG 100, 220, 320)

• Synthetic Industrial Gear Oil Ÿ
• ISO 6743-6/ CKT
• ANSI-AGMA 9005 D94, AGMA No. 3S, 5S, 6S Ÿ
Ÿ
• DIN 51517 T.3/CLP 100, 220, 320
Oil formulated from a synthetic base (PAO) and special additive package.
Benefits: Ÿ
• The Base oil inherently has excellent lubricating capacity.
• Very high VI. Ÿ
• Excellent oxidation and thermal stability. Ÿ
• Excellent anti-wear with FZG test of 12+stage pass.
• Recommended for lubrication of bearings, marine separators, gears operating at high temparatures (e.g.galss forming machines, steel strip mills, furnaces, ceramic, paper machinery).
Suitable for high temperatures up to 120 degree C, with peaks in the hottest points up to 200 degree C.
Read More

3

BLASIA S (ISO VG 150-320)

• Synthetic Industrial Gear Oil
• ISO-L-CKD
• ANSI-AGMA 9005 D94, AGMA No.4S,5S,6S Ÿ
• DIN 51502
ŸOil formulated from a synthetic base(POLYGLYCON) and special additive package.
Benefits:
• The Base oil inherently has excellent lubricating capacity.
• Very high VI. Ÿ
• Special additive package to avoid the formation of sludge even if a small part of the oil oxidizes owing to extreme working condition.
• Recommended for lubrication of bearings of calenders operating at high temperatures (glass forming machines, steel strip mills, furnances, ceramic, paper machinery). Suitable for high temperatures up to 120 degree C, with peaks in the hottest points up to 200 degree C.
Read More
4th-oil

BETULA S-(ISO VG 68)

• Synthetic Refrigeration Compressor Oil
• DIN 51503 KC
• DIN 51503 KA
• IREŸ
• SABROE
ŸBenefits:
• High chemical stability ensures oil does not react with refrigerant. Ÿ
• Low pour point and floc point. Ÿ
• High dielectric strength. Ÿ
• Very good lubricating properties.
• Recommended for lubrication of refrigeration compressors. (reciprocating, rotary-screw, vane).
Read More

8th-oil

DICREA SX (ISO VG 46, 68)

Synthetic Air Compressor oils. Meets the following Specifications: Ÿ
• ISO-L-DAB
• ISO-L-DAH Ÿ
DIN 51506 VDL DICREA SX lubricants are synthetic oils with a Polyalphaolefin (PAO) base treated with antioxidant, antirust and antiwear additives. They are specifically designed for the lubrication of air compressors.Read More
7th-oil

ARUM HT

HighTemperatureChainLubricant. ARUM HT 220 is a superior quality lubricant formulated from special ester-type synthetic bases which leave no deposits at high temperatures. It is additive-treated to impart
antiwear properties and exceptional oxidation resistance. AGIP ARUM HT 220 is expressly recommended for the lubrication of chains, bearings and gears operating at high temperatures. AGIP ARUM HT 220 can be applied by automatic sprays or drip oilers. It can also be brushed on by hand. AGIP has an extensive range of lubricants and greases in its International portfolio and for any specific application recommendation, please contact the Industrial Sales representative for the same.
Read More

 

?
Find your nearest
Dealer